20CrNiMo Precision ER Tool Holder HSK For Electronics and Automotive
Ⅰ. Features And Advantages
1. Non-eccentric nuts
2. High regidity and stability.
3. Nuts preset dynamic balance
4. Durable, increase tools life and save cost.
5. High surface quality, finishing machinng.
6. Up up to true running and repeat accuracy 0.003 mm, Increase the tool’s service life
Ⅱ. Technical Parametes
| Product Name | ER Collet Chuck |
| Spindle Type | HSK-ER |
| Clamping Range | 1~25mm |
| Runout | <0.003mm |
| Processing Type | Deep Hole Finishing Machining. |
| Product Material | 20CrNiMo (Quality Alloy Steel) |
| Hardness | HRC58~60° |
Ⅲ. Product Introduction
Standard Items
| Type | holding diameter | D1 | D2 | L1 | L2 | Collet | Spanner | Nut |
| HSK63A-ER16-70 | 3.0-10.0 | 28 | 28 | 70 | 44 | ER16 | HS-ER16A | HN-ER16A |
| HSK63A-ER16-100 | 3.0-10.0 | 28 | 28 | 100 | 74 | ER16 | HS-ER16A | HN-ER16A |
| HSK63A-ER16-150 | 3.0-10.0 | 28 | 28 | 150 | 124 | ER16 | HS-ER16A | HN-ER16A |
| HSK63A-ER20-70 | 3.0-13.0 | 34 | 34 | 70 | 44 | ER20 | HS-ER20A | HN-ER20A |
| HSK63A-ER20-100 | 3.0-13.0 | 34 | 34 | 100 | 74 | ER20 | HS-ER20A | HN-ER20A |
| HSK63A-ER20-150 | 3.0-13.0 | 34 | 34 | 150 | 124 | ER20 | HS-ER20A | HN-ER20A |
| HSK63A-ER25-70 | 3.0-16.0 | 40 | 40 | 70 | 44 | ER25 | HS-ER25UM | HN-ER25UM |
| HSK63A-ER25-100 | 3.0-16.0 | 40 | 40 | 100 | 74 | ER25 | HS-ER25UM | HN-ER25UM |
| HSK63A-ER25-150 | 3.0-16.0 | 40 | 40 | 150 | 124 | ER25 | HS-ER25UM | HN-ER25UM |
| HSK63A-ER32-70 | 3.0-20.0 | 48 | 48 | 70 | 44 | ER32 | HS-ER32UM | HN-ER32UM |
| HSK63A-ER32-100 | 3.0-20.0 | 48 | 48 | 100 | 74 | ER32 | HS-ER32UM | HN-ER32UM |
| HSK63A-ER32-150 | 3.0-20.0 | 48 | 48 | 150 | 124 | ER32 | HS-ER32UM | HN-ER32UM |
| HSK100A-ER16-80 | 3.0-10.0 | 28 | 28 | 80 | 51 | ER16 | HS-ER16A | HN-ER16A |
| HSK100A-ER16-100 | 3.0-10.0 | 28 | 28 | 100 | 71 | ER16 | HS-ER16A | HN-ER16A |
| HSK100A-ER16-150 | 3.0-10.0 | 28 | 28 | 150 | 121 | ER16 | HS-ER16A | HN-ER16A |
| HSK100A-ER20-80 | 3.0-13.0 | 34 | 34 | 80 | 51 | ER20 | HS-ER20A | HN-ER20A |
| HSK100A-ER20-100 | 3.0-13.0 | 34 | 34 | 100 | 71 | ER20 | HS-ER20A | HN-ER20A |
| HSK100A-ER20-150 | 3.0-13.0 | 34 | 34 | 150 | 121 | ER20 | HS-ER20A | HN-ER20A |
| HSK100A-ER25-80 | 3.0-16.0 | 40 | 40 | 80 | 51 | ER25 | HS-ER25UM | HN-ER25UM |
| HSK100A-ER25-100 | 3.0-16.0 | 40 | 40 | 100 | 71 | ER25 | HS-ER25UM | HN-ER25UM |
| HSK100A-ER25-150 | 3.0-16.0 | 40 | 40 | 150 | 121 | ER25 | HS-ER25UM | HN-ER25UM |
| HSK100A-ER32-80 | 3.0-20.0 | 50 | 50 | 80 | 51 | ER32 | HS-ER32A | HN-ER32UM |
| HSK100A-ER32-100 | 3.0-20.0 | 50 | 50 | 100 | 71 | ER32 | HS-ER32A | HN-ER32UM |
| HSK100A-ER32-150 | 3.0-20.0 | 50 | 50 | 150 | 121 | ER32 | HS-ER32A | HN-ER32UM |
| HSK100A-ER40-80 | 6.0-26.0 | 63 | 58 | 80 | 51 | ER40 | HS-ER40A | HN-ER40UM |
| HSK100A-ER40-100 | 6.0-26.0 | 63 | 58 | 100 | 71 | ER40 | HS-ER40A | HN-ER40UM |
| HSK100A-ER40-150 | 6.0-26.0 | 63 | 58 | 150 | 121 | ER40 | HS-ER40A | HN-ER40UM |
Cat.No |
Chucking Dia | D1 | D2 | L1 | L2 | M |
Nut |
Collet |
Spanner |
| HSK40E-HGER16-70 | 2.0-10.0 | 30 | 30.5 | 50 | 70 | TR22*1.5 | HN-HGER16 | ER16 | GH30 |
| HSK40E-HGER20-70 | 2.0-13.0 | 32 | 32.5 | 50 | 70 | TR26*1.5 | HN-HGER20 | ER20 | GH32 |
| HSK40E-HGER25-70 | 3.0-16.0 | 40 | 38.5 | 50 | 70 | TR32*1.5 | HN-HGER25 | ER25 | GH40 |
| HSK50E-HGER16-70 | 3.0-10.0 | 30 | 30.5 | 44 | 70 | TR22*1.5 | HN-HGER16 | ER16 | GH30 |
| HSK50E-HGER20-70 | 3.0-13.0 | 32 | 32.5 | 44 | 70 | TR26*1.5 | HN-HGER20 | ER20 | GH32 |
| HSK50E-HGER25-70 | 3.0-16.0 | 40 | 40.5 | 44 | 70 | TR32*1.5 | HN-HGER25 | ER25 | GH40 |
| HSK50E-HGER32-75 | 3.0-20.0 | 50 | 48.5 | 49 | 75 | TR40*1.5 | HN-HGER32 | ER32 | GH50 |
Ⅳ. Overview for HIPPSC Products
- Back Lock/Side Lock Tool Holders.
- Morse Taper/Tapering Tool Holders/Shanks.
- Torque Floating Tap/Tapping Chuck and Collet.
- Threaded/Screw-on/Thread Screw Tool Holders.
- Tool Holders/Arbors/Shanks for Mirror Finishing.
- ER/SK/Hydraulic/Back lock/Floating tapping Collet
- BT40 90mm Clamping Heat Shrinking Tool Holders.
- High Speed ER/SK/GER/GSK Tool Holder for CNC Working.
Ⅴ. Shipment
By Sea; By Air; By Train/Truck.
TNT, EMS, DHL, UPS, FedEx.
Ⅵ. Packing
PE Bag.
Plastic Box
Carton Box.
Other Materials
Rust Presensitive Oil.
Adhesive Tape.
Packing Belt.
Ⅶ. Warehouse
1. Sufficient Inventory For All Standard Products to Guarantee On-time Delivery.
2. All Materials and Products Must Be Inspected and Checked Strictly and Carefully
By IQC and OQC Operater Before Being Shipped Out.
3. Using Special Equipment and Gauge To Check Technical Parameters.
Ⅷ. Manufacturing and Sales Service
1. Manufacturing with Professional and Precise Equipments Under Experienced Workers.
2. OEM and ODM Service Are All Available Here, Produce To Customer's Need/Requirement.
3. Professional Serving Team Provides One-Stop Considerate and Satisfying Service To You.
Product Tags:
|
|
20CrNiMo Precision ER Tool Holder HSK For Electronics and Automotive Images
|
